G-C Dolly

A steel dolly with easy and quick height adjustment (trapezoidal thread with wing nut) that fits most small motorboats up to 4.4 t (max 2.2 t per dolly).

• Quick and easy height adjustment (winged nut and trapezoidal thread)
• Maintenance-free, large, pivoted hull plate with profiled hull protection of quality rubber
• Braked polyamide wheels (Ø160 x 50 mm) with double ball bearings
• Delivered unassembled in box

General recommendations:

The size of the bar stand is entirely determined by the total weight/weight distribution, be sure to check how the engine is positioned in the boat. AQ installations are always rear-heavy about 30/70% (with one engine) in weight distribution as well as “outboards” which usually have a slightly better weight distribution because they are generally lighter than the equivalent. AQ installation. Note: the total weight should include the weight of the cover and e.g. snow load if it is of the deck stand type, as well as the weight of fuel, water, extra equipment, etc. Manufacturers generally indicate weights for the “empty boat”, the actual weight is usually about 20% greater (a 2.5 metric ton boat weighs about 3.0 metric ton).

When setting up, 2 buoys (bow + stern) are always required. The width of the bar stand should be about equal to the beam of the boat.

If in doubt – consult the manufacturer.